manualshive.com logo in svg

MRC IR-CAM-400, Operation Manual

Share
Download
MRC IR-CAM-400 Operation Manual Download Page 15

 

7 

 
10). Power Indicator

 

After infrared camera is turned on, the indicator functions as a power 
indicator in green; functions as a charging indicator in orange, indicating 
the battery is being charged now. 

 
11. External DC In 

External DC requirement is DC 12V.

 

 
12. SD card interface 

MICRO 8G SD card can be inserted into the interface to expand storage 
volume. 

 

 
13. Audio output interface 

Please insert adapter to connect to headphones to playback recorded 
voice annotation. 

 
14. Mini USB interface 

Picture, video and test data can be transferred to PC through mini USB.

 

 
15. Video output interface 

Use video cable to connect to monitor display.

 

 
16. Battery 

The device includes two rechargeable Li-lion batteries which can work for 
3 hours continuously each when fully charged under normal temperature.   

 
17. Shutter Button 

Choose corresponding file and click this button to record voice annotation 
and take photos.

 

(More detail please refer to "infrared image and voice annotation" on 
page12)

 

 

18. Direction Buttons 

Up (

), Down (

), Left (

), Right (

) , and 

 (Menu / Enter)

 

buttons have different usages in different modes. 

Summary of Contents for IR-CAM-400
























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands