Total Operation Diagram (Sheet 5)
2.2 Measurement parameters
The meter supports GLP norms, each result contains a complete set of measurement
parameters. Including several parts, such as prompt parameters, conductive probe
calibration parameters, measure control parameters, sample parameters,
measuring results parameters, etc. Following is a detailed description.
Measurement parameters:
it is the current measurement parameter types that
is the main measurement parameters. The meter displays in the window, take the
main measurement parameters, auxiliary parameters, temperature data as a
group of display unit. Main measurement parameters including the conductivity,
TDS, salinity, resistivity, their corresponding auxiliary parameters respectively are
resistivity, conductivity, conductivity and conductivity.
Setting user ID
Basic information
Display
current time
User
ID
Measuring signal
monitoring
Shows
current
result
Shows
last
calibration
result
Power on, self-test
Enter into the initial interface. The initial interface has three
parts: Basic information, measuring signal monitoring, system
System menu
System
settings
View
stored
results
Click the measure
windows to start
measurement
Set system time,
backlight, auto
power off, touch
screen, etc
View saved
measurement
results in different
ways
Click the calibration
result to calibrate
directly
2.1.5 O
peration chart
