CONTENT
1. Installation
1.1 Unpacking
1.2 Structure
1.3 Installation
1.3.1 The installation of measuring probe
1.3.2 The installation of the power charger
1.3.3 The installation of the USB cable
1.3.4 Daily use
2. Operation
2.1 Introduction
2.1.1 Terms
2.1.2 Features
2.1.3 Technical specifications
2.1.4 Operation
2.1.5 Operation diagram
2.2 Measurement parameters
2.3 Start-up, shutdown and buttons
2.4 Initial interface
2.5 meter operation
2.5.1 System setup
2.6 conductive probe calibration
2.6.1 Several methods of conductive probe calibration
2.6.2 Before calibration
2.6.3 Check calibration parameters
2.6.4
Start
calibration
2.6.5 Calibration results report
2.7 Measurement
2.7.1 Preparation
2.7.2 Check measurement parameters
2.7.3 Check reading mode
2.7.4 Check calibration result
2.7.5 Check temperature options
2.7.6 Check sample, alarm setting
2.7.7 Start measurement
2.7.8 End measuring, result report
2.8 Data center
2.8.1 View conductive probe calibration information
2.8.2 View stored result
2.8.2.1 View settings
2.8.2.2 View result
2.8.2.3 Result report
3. Maintenance
3.1 Maintenance
3.2 Common troubleshooting
4.
Appendix
Ordering information
