Chromatograph Series
User Manual
MRC Instrument
4
it, the file name will be displayed as a user-defined name, the content will also be updated. Next time, when it
instrument is switched on, it will automatically recall the latest saved file.
It is also very convenient and simple to recall any test information which is saved before.
The user can also save the status information of each modification with another file name, or load different saved files
according to your needs. The file information and instrument status can also be changed depending on the content of
the file recalled by the user.
6.5.2 Store/Load
Refer to area [B] in Figure 6.5.
Click [Store], as shown in Figure 6.5.2-A. Click the alphanumeric keys to input the file name, and then click [upper case]
to switch between the upper and lower case letters. For different sample, choose different conditions. It is best to
name the file with the sample name. Later when testing the sample, you can directly call the file, and the instrument
will automatically resume the original test state.
After entering the file name, click [OK] to display the file sequence window as shown in Figure 6.5.2-B. There are 20
storage locations to choose from.
Select the storage location as needed in the "File Sequence", as shown in Figure 6.5.2-C. Click [YES] to save the current
