- 5 -
1. UNWRAPING THE BALANCE
1.1. The balance AS
B
/X
Cut safety tape off. Take balance off the box. Take all necessary to
correct performance of balance elements off the box. After replace
balance in place of use put scale and rest of elements on.
−
open side doors of weighing
chamber,
−
inside the chamber place lower
shield of weighing chamber (1),
−
inside the chamber place anti-
breeze shield (2),
−
put centring ring on the shield
(3),
−
put the balance pan inside the
ring (4),
−
close side doors of weighing
chamber,
−
turn on balance supply,
−
pin of power adaptor should be
connected to socket in the back
of balance casing.
.
Draw 1. The components installation for the WAS X balance with d=0,1mg
The balance is supplied through power pack 110-230 V AC / 13,8 V DC.
Power pack socket is at the rear of the balance.
