13 Technical data
Maschinenfabrik Reinhausen GmbH 2020
57
1800138/08 EN
TAPMOTION
®
ED
Technical data
Technical data for TAPMOTION® ED
The technical data applies to the standard design and may vary depending
on the design delivered. Subject to change without prior notice.
Motor-drive unit
ED 100-S/L
ED 200-S/L
Motor power
0.75 kW
2.0 kW
2.2 kW
Motor circuit power supply
3 AC/N 230/400 V
Current
approx. 1.9 A
approx. 5.2 A
approx. 6.2 A
Frequency
50 Hz
Synchronous speed
1,500 rpm
Rotations of the drive shaft per tap-change opera-
tion
16.5
Duration of the tap-change operation
approx. 5.4 s
Rated torque on the drive shaft
45 Nm
90 Nm
125 Nm
Rotations of the hand crank per tap-change opera-
tion
33
54
Maximum number of operating positions
35
Voltage supply for control circuit and heater circuit
AC 230 V
Power consumption of the control circuit (control/
operation)
100 VA/25 VA
Heating power
50 W for ED 100/200 S
60 W for ED 100/200 L
Load capacity of micro-switches
Switching capacity: 100 W
AC voltage/current: 250 V AC 100 mA…4 A
DC voltage/current: 220 V DC 10 mA…250 mA
Protection against foreign objects and water
IP 66 in accordance with DIN EN 60529
Test voltage to ground
2 kV/60 s
Weight
maximum 130 kg
Table 13: Technical data for TAPMOTION® ED
Technical data for position transmitter equipment
Resistance-type position transmitter module
Standard resistance: 10.0 Ω (0.6 W, +/-1 %) per tap position
The number of desired operating positions determines the number of loaded
resistors.
13
13.1
13.2
