19
Locating the Caddy/Fragrance:
1. Place in a location that allows visual monitoring of the fragrances level.
2. Place in a location that allows for easy replacement of the fragrance container.
3. The caddy should not be installed in areas accessible to children. A locked
room is strongly recommended (ie: utility room).
4. The caddy is designed and intended for indoor use only.
Do not install outdoors.
5. Do not install in an unheated location where water could freeze.
6. Locate in a area where the ambient temperature does not exceed 88˚ F.
WARNING
!
1Ã}Ê>ÊvÀ>}À>ViÊVÌ>iÀÊÌ >ÌÊÃÊÌÊÃiVÕÀi`ÊÊÌ iÊ
caddy, or using a caddy that is not mounted may result
in spillage, excessively strong vapors or a fire hazard.
7. Insert the fragrance container with the label facing outward so it is visible through
the caddy window (Diagram 1). The label contains important information.
8. Always keep the container in the caddy while it is connected to the
dispensing pump.
Diagram 1
OPERATION
Powering Up the Pump
IMPORTANT NOTE:
This step only needs to be performed
during installation.
1. The pump needs to be turned on before it can be used
2. Press and hold the power button for 3 seconds.
The LED will turn on solid red.
PUMP LED LIGHT:
KEY:
Flashing Green LED
Pump is OFF. Press and hold the power button for 3 seconds to turn the pump on.
Solid Red
Pump is ON, but has not been activated. To activate the pump, turn your steam
generator ON from the in-shower control and press the aroma button.
Solid Green LED
Pump is on and has been activated from the in-shower control.
The LED will turn off each time the pump injects fragrance into the steam line.
Fragrance
Setting Knob
Power Button
LED Light
Rev C
H O M E O W N E R S E C T I O N
AromaSteam
Operation and Installation Instructions
®
All Drawings for Illustrative Purposes Only
19
