ILLUSTRATIONS
DECLARATION OF CONFORMITY
GB
CONTENT OF PACKAGING
Kinetic push 230V Re Mobile Re Industrial tape + Plugs
PARTS & BUTTONS
1. Kinetic Push Button
A: Doorbell button
INSTALLING AND PAIRING THE KINETIC PUSH BUTTON
You can attach the Kinetic Push Button to any surface using the supplied industrial tape and screws.
Take the plastic plate with the 2 screw holes and hold it against the wall you wish to attach it to. By
using a pencil, indicate where you need to drill the holes. Drill 2 holes where the indication is visible.
Insert 2 plugs into the holes, place the plastic plate in the correct location and screw it in place. To finish,
put one side of the the Industrial tape on the plastic plate and stick the Push Button on the other side.
You can pair multiple push buttons (optionally available on
www.mrhandsfree.com
) with the receivers.
INSTALLING AND PAIRING THE 230V RECEIVER
You can plug the 230V Receiver into any socket in your house, the pairing for your set has already been
done during production.
To pair an extra 230V Receiver with your Push Button (optionally available on
www.mrhandsfree.com
),
put the Receiver into a power socket to turn it on, the receiver is now in pairing mode for 2 minutes.
Press the Doorbell button (A) once. You will hear a sound notification and see a red light on the 230V
Receiver to indicate that your devices are paired.
Up to 8 Push Buttons can be saved on one receiver. If you attempt to add a ninth, the first one will be
deleted. 1 Push Button can be connected to an unlimited number of receivers.
INSTALLING AND PAIRING THE MOBILE RECEIVER
Before installing the Mobile Receiver, insert 3x AA Alkaline batteries into the Battery Compartment
(F). Open the cover of the battery compartment. Insert 3 AA Alkaline batteries according to the visible
scheme and close the cover. You can take the Mobile Receiver anywhere in your house (up to 100 m),
the pairing for your set has already been done during production.
To pair an extra Mobile Receiver with your Push Button (optionally available on
www.mrhandsfree.com
),
you should turn on the Mobile Receiver by sliding the ON/OFF switch (E) in the ON position, the Mobile
Receiver is now in pairing mode for 2 minutes. Press the Doorbell button (A) once. You will hear a sound
notification and see a red light on the Mobile Receiver to indicate that your devices are paired.
Up to 8 Push Buttons can be saved on one receiver. If you attempt to add a ninth, the first one will be
deleted. 1 Push Button can be connected to an unlimited number of receivers.
SELECTING A RINGTONE AND ADJUSTING THE VOLUME
To select a ringtone on either the 230V Receiver or the Mobile Receiver, press the Tone selection button
of the device (C, G) until you hear the ringtone you wish to select.
Note:
If you wish to have the same ringtone on both devices, you have to set it for each device separately.
Note:
When multiple Kinetic Push Buttons are paired to your device, it is not possible to have a separate
sound for each
Push Button
.
To adjust the volume on either the 230V Receiver or the Mobile Receiver, first, press the Tone selection
button of the device (C, G) to hear a tune and press the Volume button of the device (D, H) to select
the desired volume.
SUPPORT
For more information, technical questions and return requests concerning this product, you should
contact
WARRANTY
Mr Handsfree is a registered trademark of TE-Group NV. The mr Handsfree brand stands for superior
product quality and outstanding customer service. That is why mr Handsfree warrants this product
against all defects in material and workmanship for a period of two (2) years from the date of original
purchase of the product. The conditions of this guarantee and the extent of responsibility of mr
Handsfree under this guarantee can be downloaded from our website:
www.mrhandsfree.com
.
2. 230V Receiver
B: Power Plug
C: Tone selection button
D: Volume button
3. Mobile Receiver
E: ON/OFF switch
F: Battery Compartment
G: Tone selection button
H: Volume button
1.
2.
3.
A.
B.
C.
D.
E.
G.
H.
F.
Hereby,
Par la présente,
Company /
Entreprise:
Address: /
Adresse:
declare that the following equipment: /
déclare que le dispositif suivant :
Product name:
Nom du produit:
Product type:
Type de produit:
conforms with the following safety requirements of the directives 2011/65/EU, 2015/863/EU, 2014/53/EU.
Conformity is guaranteed by the CE-symbol. This product has been tested against following standards and
specifications, applying versions valid in April 2020. The full text of the EU declaration of conformity is available
at the following internet address:
http://www.mrsafe.be/DOC_KB-333
.
est conforme aux exigences de sécurité suivantes des directives 2011/65/EU, 2015/863/EU, 2014/53/EU. La
conformité est garantie par le symbole CE. Ce produit a été testé par rapport aux normes et spécifications suivantes,
appliquant les versions valides en Avril 2020. Le texte complet de la déclaration UE de conformité est disponible à
l’adresse internet suivante:
http://www.mrsafe.be/DOC_KB-333
.
EN62321-1,2,3,4,5,6,7,8:2015
EN62368-1+A11:2017
EN330220-2 V3.2.1
EN301489-1 V2.2.3
EN301489-3 V2.2.3
EN62479:2010
J. Van Os, Product & Research Manager
Authorized Signature, Kapellen - April 2020
TE-Group NV
Kapelsestraat 61, 2950 Kapellen, Belgium
mr Safe KB-333
Wireless Kinetic Doorbell Set
WWW.MRSAFE.EU
KB-333
EASY TO INSTALL
USES THE WIRING &
ADAPTER OF YOUR
CURRENT DOORBELL
FREE APP
FOR IOS &
ANDROID
DEVICES
BATTERY FREE
KINETIC DOORBELL SET
SENDER
230V RECEIVER
MOBILE RECEIVER
+
+
USER MANUAL
GB
FR
NL
D
FR
