background image

3

 

 

IMPORTANT SAFEGUARDS 

When using electrical appliances, basic safety precautions should be followed to reduce the risk of fire, electric shock, and injury to 
persons or property. Read all instructions before using any appliance. 

 

Do not operate this or any other appliance with a damaged cord. 

 

Connect to properly polarized outlets only. No other appliance should be plugged into the same outlet. Be sure that the plug is 
fully inserted into the receptacle. 

 

Do not run cord over carpeting or other heat insulators. Do not cover the cord. Keep cord away from traffic areas, and do not 
submerge in water. 

 

We do not recommend the use of an extension cord, as it may overheat and become a risk of fire. If you must use an 
extension cord, use No.14 AWG minimum size and rated no less than 1875 watts.  

 

Unplug the ice maker before cleaning or making repairs. 

 

Exercise caution and use reasonable supervision when appliance is used near children. 

 

Do not clean your ice maker with flammable fluids. The fumes can create a fire hazard or explosion. 

 

Do not tip over. 

 

If the ice maker is brought indoors from outdoors during the wintertime, give it a few hours to warm up to room temperature 
before plugging it in.  

 

It is strongly recommended that any servicing be done by a qualified individual. 

 

Do not leave this appliance in places of either extreme cold or warm temperatures. 

 

Do not place the appliance near any sources of heat or open flame. 

 

Do not place heavy items on top of this appliance. 

 

Never install or place the ice maker where there is a lot of moisture or where water can splash on it. 

 

Use extreme caution when appliance is used near children 

 

Do not let children operate this device. 

 

Do not operate the appliance after either the side or back panels have been removed. 

 

Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged in any 
manner. Return the appliance to the nearest authorized service facility for examination, repair or adjustment. 

 

Remove all packaging plastics and other materials from the unit before operating. 

 

Wash all removable accessories before using for the first time. 

 

To protect against electrical shock, do not immerse cord, plug or appliance itself in water or other liquids. 

 

The use of accessory attachments not recommended by the appliance manufacturer may cause injuries. 

 

Always attach plug to appliance first, then plug cord into wall outlet. To disconnect, turn all controls to the OFF position, grasp 
plug body and remove from the electrical outlet. Do not pull by the cord. 

 

Do not store any materials other than the manufacturer’s recommended accessories in this appliance when it is not in use. 

 

Do not use the appliance for other than its intended use. 

 

 

 

 

Summary of Contents for MIM-88














Reviews: