….
INSTALLATION
1.
Ventilation: Do not block air vents. It is necessary to have adequate ventilation space
around the ice maker in order to sustain proper performance, dissipation of heat,
maintain efficiency and keep power consumption low. There should be a 5 inch
minimum clearance maintained at the rear and sides of the unit and 8 on the top of
the unit.
2.
Cleaning: It is highly recommended to thoroughly clean the ice maker before first use.
3.
Wait One Hour: When plugging in for the first time, wait one hour for refrigerant fluid
to settle before turning the unit on.
4.
Power Supply:
The ice maker should always be plugged into its own individual electrical outlet which
has a voltage rating that matches the rating label.
…
BEFORE FIRST USE
1.
Remove all exterior and interior packaging. Check that ice basket and ice scoop are
included. If any part or accessory is missing, please contact customer service.
2.
Clean the interior with lukewarm water and a soft cloth. Remove the ice basket and
wash in warm water.
3.
Find a location for your ice maker that is protected from direct sunlight and other
sources of heat (i.e.: stove, furnace, and radiator). Place the ice maker on a flat, level
surface. Make sure that there is at least 5 inches of space between the back and
sides of your ice maker and the wall.
4.
Make sure the Silicone Plug is inserted properly into the bottom of the water tank
beneath the ice basket.
5.
Allow one hour for the refrigerant fluid to settle before plugging in the unit.
6.
The appliance must be positioned so that the plug is accessible.
5
