PAGE 26 — MVH208GH PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #1 (07/29/16)
Figure 25. Cyclone Air Cleaner
3. Clean foam element in warm, soapy water or
nonflammable solvent. Rinse and dry thoroughly. Dip
the element in clean engine oil and completely squeeze
out the excess oil from the element before installing.
Dust Pot
Always clean the dust pot. A clogged dust pot reduces
cyclone effect with cleaner element wearing easily.
1. Remove the four pan head screws that secure the dust
pot to pre air cleaner case cover. (Figure 26).
WING NUT
FOAM
FILTER
ELEMENT
PAPER
FILTER
ELEMENT
AIR CLEANER
COVER
GASKET
BLOW COMPRESSED
AIR FROM THE
INSIDE OUR
NOTICE
Operating the engine with loose or damaged air cleaner
components could allow unfiltered air into the engine
causing premature wear and failure.
MAINTENANCE
Figure 26. Removing Dust Pot
2. Clean dust pot with water and neutral detergent.
3. Reinstall dust pot back onto pre air cleaner case cover.
ENGINE OIL
1. Remove the oil drain bolt (Figure 27). and sealing
washer and allow the oil to drain into a suitable
container.
2. Replace engine oil with recommended type oil as listed
in Table 4. For engine oil capacity, see Table 2 (Engine
Specifications).
DO NOT
overfill.
3. Reinstall drain bolt with sealing washer and tighten
securely.
Figure 27. Draining Engine Oil
NOTICE
Drain the engine oil when the oil is warm.
Engine oil drain
(Drain bolt)
Discount-Equipment.com
