PAGE 20 — MT76D RAMMER • OPERATION AND PARTS MANUAL — REV. #7 (07/14/16)
LONG TERM STORAGE
Place the throttle lever in the
STOP
position.
Drain the fuel tank completely, including fuel lines or add
STA-BIL to the fuel,
Replace lubrication fresh oil.
Cover the air intake on the air cleaner and the exhaust
outlet on the muffler.
Clean exterior of rammer with an oil moistened cloth.
Store rammer indoors covered with plastic sheet in
moisture free and dust free location out of direct sunlight.
MAINTENANCE/TROUBLESHOOTING
Troubleshooting (Rammer)
Symptom
Possible Problem
Solution
Engine runs but rammer jumps
erratically or not at all.
Operating speed of throttle lever is
incorrectly set?
Set throttle lever to correct position.
Oil in excess?
Drain excess oil. Bring to correct level.
Clutch slips?
Replace or adjust clutch.
Spring Failure?
Replace spiral spring.
Speed of engine improper?
Adjust engine speed to correct
operating RPM setting.
Soil over-compacted?
Shut down machine and test soil.
Summary of Contents for Mikasa MT76D
