MQ Multiquip Mikasa MT76D, Operation And Parts Manual

Page: 12 / 54

PAGE 12 — MT76D RAMMER • OPERATION AND PARTS MANUAL — REV. #7 (07/14/16)
COMPONENTS
Figure 1. MT76D Major Components
Figure 1 shows the location of the controls and components
for the MT76D Tamping Rammer. The functions of each
control is described below:
1.
Fuel Tank/Cap – Remove this cap to add diesel fuel.
Rifill with No. 2 diesel fuel only. Fuel tank capacity is
.871 gallons (3.3 liters)
2.
Throttle Lever
– Controls engine speed and the
tamping action of the rammer.
3. Handle – To operate rammer, grip handle assembly
firmly on both sides
4.
Oil Bath Fill Plug
– Open this plug to add oil to the
oil bath reservoir.
5.
Oil Level Sight Glass
– Indicates the level of oil in the
oil bath reservoir.
6. Drain Valve – Open this valve to remove oil from the
bellows.
7.
Foot
– Laminated wood with tempered steel plate for
superior shock absorption.
8.
Bellows
– Reservoir for oil bath.
9. Engine Air Cleaner – Prevents dirt and other debris
from entering the engine.
10. Decompression Lever – Use in the starting of the
engine. Press down on lever to engage. After engine
starts lever will return to original position.
11.
Fuel Filte
r – Located inside fuel tank. Prevents dirt and
debris from entering fuel system.
NOTICE
Operating the engine without an air filter, with a
damaged air filter, or a filter in need of replacement
will allow dirt to enter the engine, causing rapid engine
wear.