MT76D RAMMER • OPERATION AND PARTS MANUAL — REV. #7 (07/14/16) — PAGE 13
BASIC ENGINE
The engine (Figure 2) must be checked for proper lubri-
cation and filled with fuel prior to operation. Refer to the
engine manufacturer's manual for detailed operation and
service information.
1.
Muffler
— Used to reduce noise and emissions. Never
touch muffler when it is hot.
2.
Starter Grip
— To start engine, pull the starter grip
until resistance is felt, then pull briskly and smoothly.
3.
Recoil Starter (pull rope)
— Manual-starting method.
WARNING
Engine components can generate
extreme heat. To prevent burns,
DO
NOT
touch these areas while the
engine is running or immediately
after operating.
NEVER
operate the
engine with the muffler removed.
4.
Engine Oil filter
– Prevents dirt and other debris from
entering the engine.
5.
Oil Drain Plug
— Remove this plug to remove oil from
the engine's crankcase.
6.
Dipstick/Oil Filler Cap
— Remove this cap to
determine if the engine oil is low. Add oil through this
filler port as recommended in Table 3.
7.
Engine Speed Lever
— Controls engine speed.
8.
Fuel Injection Pump
— Pumps fuel to the injector.
Figure 2. Yanmar L40ADRM Diesel Engine
Summary of Contents for Mikasa MT76D
