HTX6H, STX6H TROWEL • SETUP, ADJUSTMENTS AND CALIBRATIONS — REV. #1 (09/07/17) — PAGE 13
INITIAL CHECK AND ADJUSTMENTS
FLUID FILL AND CHECK
Hydraulic Oil Check
1. To check the hydraulic oil level, place the trowel on a
secure flat surface with the engine stopped.
2. Visually inspect the hydraulic oil expansion tank
(Figure 5). For normal operation the fluid level should
be visible when the filler cap is removed.
Figure 5. Hydraulic Oil Expansion Tank
3. If the hydraulic oil level is low, fill with
Parker Duraclean™ ISO 46 anti-wear type hydraulic
oil to the recommended operating level (8 gallons/30
liters).
HYD
RA
UL
IC
O
IL O
NL
Y
HY
DR
AU
LI
C
O
IL
O
NL
Y
HYDRAULIC OIL
TANK
HYDRAULIC OIL
FILLER CAP
Engine Oil
1. When checking or adding oil, place the machine so
the engine is level.
2. Pull the engine oil dipstick from its holder (Figure 6).
Figure 6. Adding Engine Oil
3. Determine if engine oil is low. Oil should be between
the upper limit and lower limit (add oil) lines.
4. If oil is below the "
Add Engine Oil
" line add oil up
to upper limit on the dipstick. Allow enough time for
any added oil to make its way to the oil pan before
rechecking.
DIPSTICK
F
L
FULL
ADD
OIL
CAUTION
DO NOT
overfill the oil pan with engine oil. Always keep
the engine oil level between the upper and lower limit
lines on the dipstick.
