IN THE BOX
3/32
1/8
3/16
1/2
7/16
USB CABLE
USB CABLE (PC ONLY)
DIRECT WHEEL CONNECTION
WHEEL MODE SELECTION
- Turn the wheel on.
- Press and release the Calibration/Mode
button on the pedals until the
appropriate mode for your wheel is
chosen.
Modes:
LED 1 - Thrustmaster
LED 2 - Fanatec
LED 3 - Logitech
- When you see the appropriate LED blink,
the mode is saved and your pedals are
ready to be used with your wheel.
3/32
- Plug the blue end of the appropriate cable for your wheel
into your SimPedals.
- Plug the other end of the cable into the appropriate pedal
port on your wheel.
- Press and hold the
Calibration/Mode button for 5
seconds. The indicator lights
will flash several times and
begin to "sweep" back and
forth.
- Press each of the 3 pedals
down fully and release.
- Press and hold the
Calibration/Mode button for 5
seconds.
- The pedals are now calibrated
and calibration is saved even if
power is removed. You can
calibrate the pedals as often as
you would like.
REQUIREMENTS
PC:
Windows XP, 7, 8
USB Port
Xbox 360
TM
, Xbox One
TM
, Playstation 3
TM
,
Playstation 4
TM
Thrustmaster: Wheels
T500
TX
Logitech:
G25
G27
Fanatec
All Fanatec
CALIBRATION
www.mainperformancepc.com/support-center/
1-877-677-2798 ext.7
SPACING ADJUSTMENT
PRESSURE ADJUSTMENT
HEIGHT ADJUSTMENT
TRAVEL ADJUSTMENT
SUPPORT
3/16
1/2
1/2
1/8
- Route USB Cable between pedal arm and mounting pivot
as tagged
7/16
! ! RE-CALIBRATE AFTER ADJUSTING TRAVEL ! !
