MPP Solar PIP3624MT, User Manual

Page: 11 / 33

9
Take the 250Wp PV module as an example. After considering above two parameters, the recommended
module configurations are listed in the table below.
Solar Panel Spec.
(reference)
- 250Wp
- Vmp: 30.1Vdc
- Imp: 8.3A
- Voc: 37.7Vdc
- Isc: 8.4A
- Cells: 60
SOLAR INPUT
Q'ty of panels
Total input
power
Min in series: 2 pcs, max. in series: 12 pcs.
2pcs in series 2 pcs 500W
4pcs in series 4 pcs 1000W
6 pcs in series 6 pcs 1500W
8 pcs in series 8 pcs 2000W
12 pcs in series 12 pcs 3000W
8 pieces in series and 2 sets in parallel 16 pcs 4000W
10 pieces in series and 2 sets in parallel 20 pcs 5000W
11 pieces in series and 2 sets in parallel
(only for PIP5648MT model)
22 pcs 5500W
12 pieces in series and 2 sets in parallel
(only for PIP5648MT model)
24 pcs 6000W
Take the 555Wp PV module as an example. After considering above two parameters, the recommended
module configurations are listed in the table below.
Solar Panel Spec.
(reference)
- 555Wp
- Imp: 17.32A
- Voc: 38.46Vdc
- Isc: 18.33A
- Cells: 110
SOLAR INPUT
Q'ty of panels
Total input
power
Min in series: 2 pcs, max. in series: 11 pcs.
2pcs in series
2 pcs 1110W
4pcs in series 4 pcs 2220W
6 pcs in series 6 pcs 3330W
8 pcs in series 8 pcs 4440W
9 pcs in series 9 pcs 4995W
10 pcs in series (only for PIP5648MT model) 10 pcs 5550W
11 pcs in series (only for PIP5648MT model) 11 pcs 6000W
PV Module Wire Connection
Please take the following to implement PV module connection:
1. Remove insulation sleeve for about 7 mm on your positive and negative
wires.
2. We recommend using bootlace ferrules on the wires for optimal
performance.
3. Check polarities of wire connections from PV modules to PV input screw
terminals. Connect your wires as illustrated below.
Recommended tool: 4mm blade screwdriver