Mpio FY 600, User Manual

Page: 3 / 37

The following information is for protecting the user’s safety and any property damages.
Please read the following information and use the product accordingly.
Safety Precautions
4 5
Do not use in high temperature
(near heating device or heat
generators).
Do not use in minus zero temperatures
or outdoors during winter (operating
temperature 0˚C~40˚C).
Do not use in high humidity or places
of dropping in water.
Do not use in places with high
amount of dust.
Do not use in direct sunlight or
inside a car.
Do not use in places with high
vibration.
Do not use near highly magnetic
devices.
Be Careful of strong impact. Do not dismantle, repair, or modify
the product.
Be careful of foreign substances
entering the product interior.
E.g.) Paper clips, paper, water,
drinks, etc.
When removing foreign substances
from the product surface, always
use a soft cloth or a towel. Do not
use chemical solvents.
User Safety
① Traffic safety
- Do not listen to music using headphones or earphones when riding a bicycle, motorcycle, or driving a
vehicle. It is dangerous and it may be against the law in some regions.
- Reduce the headset or earphone volume when listening to music or FM while you’re walking.
There is a risk of an accident.
② Hearing Protection
- Do not use headphones or earphones for a long period of time. Professionals suggest that long use of
all portable audio devices may have a possibility of causing hearing loss.
① MPIO Co., Ltd. will not be responsible for data loss or damages occurred while transferring data between the
product and a PC.
② When storing important data, please make a back-up copy. The data may be damaged due to
malfunction or other elements such as outer impact or lack of battery. Please note that in case of data
loss, MPIO Co., Ltd. will not be responsible for the lost data.
③ When inserting/removing the USB plug into a computer, please do so by holding the plug.
④ When the product is connected to a computer, please do not cause impact or shake the connector.
⑤ You should back up the data saved in the product before requesting the after service. MPIO will consider that
the customers have backed up their data before sending it to MPIO for after service. MPIO will not back up
your data upon receiving the after service request. Additionally, MPIO will bear no responsibility over data loss
during the service.
Data Storage
Getting Started