Mpio FY 500, User Manual

Page: 4 / 37

6 7
1. Introduction
1. Introduction
1. Introduction
Usage Precautions 1
1 Usage environment and product safety
Refrain from using or storing the product at the places listed below.
Place with high temperature
like a heater or heat
generator.
Outdoor in the winter time or place
with low temperature below zero
(Product operational temperature:
0 ℃ ~40 ℃ )
Place with humidity or
possibility of flooding.
Dusty area Inside a car or under the
direct sunlight
Place with much vibration
Close to the strong magnetic
materials
Be careful not to apply
strong shock.
Do not disassemble, repair,
or modify at your own
discretion.
Be careful not to insert the foreign
object inside the product. (e.g.,
clip, paper, water, beverage, and
so on.)
If the product surface is covered
with the foreign object, clean it
with soft cloth or towel. Do not
use the chemical solution.
2 User’s safety
① Traffic safety
- Please refrain from using this product in wearing a headset or earphone while riding on the bicycle,
motorcycle, or car. There is a risk of a car accident. Additionally, it may violate the regional laws and
regulations.
- Reduce the headset or earphone volume when listening to music or FM while you’re walking.
There is a risk of an accident.
② Protecting your hearing capability
- Please refrain from listening to music for a long time. Medical care expertise point out the risk of
impairing your hearing capability if you use the portable audio device for a long time.
3 Safe data storage
①
MPIO bears no responsibility over data loss or damage that occurs during data transmission between
the product and the computer.
② Make sure to back the important data saved in the product. Data stored in the product can
be lost due to product breakdown, malfunction, or other reasons. (External shock or power
failure). In this case, MPIO bears no responsibility. Please keep in mind this.
③ Hold the plug tightly when inserting/disconnecting the USB socket terminal to/from the PC.
④ Do not apply shock or shake the product while the product is connected to the PC.
⑤ You should back up the data saved in the product before requesting the after service. MPIO will
consider that the customers have backed up their data before sending it to MPIO for after service.
MPIO will not back up your data upon receiving the after service request. Additionally, MPIO will bear
no responsibility over data loss during the service.