224
Appendix B
Interface And RFID Options
This wireless device may cause radio wave interference during operation.
OPERATING INSTRUCTIONS UNDER WHICH THE
RADIOCOMMUNICATION EQUIPMENT ARE EXEMPTED FROM
LICENSING
To maximize frequency sharing while minimizing radio interference, the
following operating conditions are imposed to confine the propagation of radio
signals within a building or at a localized site.
1.
The radiocommunication equipment shall be used for in-building or
localized on-site operations;
2.
The radiocommunication equipment shall operate at frequencies or
frequency bands designated by IDA on non-exclusive basis;
3.
The radiocommunication equipment shall not operate beyond maximum
permissable output power designated by IDA to confine the propagation
of radio signals to a small localized area;
4.
For an on-site localized operation with little obstruction by the nearby
buildings or terrain, height of any external antenna, if installation
approved by IDA, shall not be more than 10 meters above ground level to
limit the radio wave propagation; and
5.
No repeater station shall be used to extend the radio coverage.
•
Without permission granted by the NCC, any company, enterprise, or
user is not allowed to change frequency, enhance transmitting power or
alter original characteristic as well as performance to an approved low
power radio-frequency devices.
•
The low power radio-frequency devices shall not influence aircraft
security and interfere legal communications. If found, the user shall cease
operating immediately until no interference is achieved. The said legal
communications means radio communications is operated in compliance
with the Telecommunications Act. The low power radio-frequency devices
must be susceptible with the interference from legal communications or
ISM radio wave radiated devices.