MPC 1250, Operator'S Manual, Page: 8 / 44

Section II General Product Information
006-0007207 MPC-1250DC Guide Rev F 8 of 44 03/03/2022 www.synqor.com
Part Numbering Scheme and Options
This table shows the part numbering scheme for the full line of SynQor MPC products:
Base Models
Model Number Power Height (W x D x H) Weight
MPC-1250-1S 1250 W 1U (17.00” x 14.80” x 1.73”) 22 lbs.
Base Model
Options Options
AC Input
Frequency
DC
Regulation
Type
DC
Output
Voltage
DC
Input
Additional
Options
AC Input
Freq
L 47 - 65 Hz
W 47 - 800 Hz
DC Reg
R Fully Regulated, No Paralleling
MPC-1250-1S-
L
W
R
P
C
28
24
D00 -E
00
CE
P Fully Regulated with Paralleling
C Constant Current Overload Protection
DC Output
28 28 V Output *
24 24 V Output *
Not all combinations make valid part numbers, please contact SynQor for availability.
DC Input D00 DC Input
See the Product Summary web page for more options.
Additional
Options
-E Ethernet/SNMP with Configuration Loading
00 No CE Marking
Examples:
CE CE Marking
MPC-1250-1S-LR28D00-E00, MPC-1250-1S-WP24D00-E00, MPC-1250-1S-LR28D00-ECE (Fully Regulated with CE Marking)
* Select 28 V Output option when ordering Constant Current regulation type
The MPC‑1250 DC Output Series of products provide up to 1250 W of total output power (DC).
Various options can be specified according to the part numbering scheme shown in the table:
• The allowable frequency of the AC INPUT can either be in the 47‑65 Hz range (for 50 Hz and/
or 60 Hz systems) or in the 47‑800 Hz range (for 400 Hz and Variable Frequency systems)
• The output voltage of the MPC‑1250 DC Output Series can be 24 or 28 volts nominal.
• There is a DC INPUT that is specified to comply with MIL‑STD‑704F and MIL‑STD‑1275D for
28 V systems
• “Constant Current” DC output for charging lead‑acid batteries used in 28 V vehicle power
applications.
• RS232 serial port and logic‑level I/O communication are included in the standard model. An
Ethernet port provides web and SNMP interfaces.