- 58 -
4.6. Firmware upgrade
Both the transmitter and the receiver firmware can be updated in the same way.
Be sure that the firmware files are located in the SEMS Software folder.
Recharge the unit batteries and connect it to
Turn on the unit, run the SEMS
pressing Select Comm.
To verify the assignation of the COM port assigned by the PC check in the control
panel, System, Hardware, peripheral, ports
To start the firmware update procedure, click the “Tools” but
and then Update Rx or Update Tx
Supposing you are updating the Rx unit, t
Turn off the receiver and then turn it on again.
It will show the upgrade window:
USER’S MANUAL
S E M S
Firmware upgrade
Both the transmitter and the receiver firmware can be updated in the same way.
Be sure that the firmware files are located in the SEMS Software folder.
batteries and connect it to the PC using RS232 cable.
, run the SEMS Software and set the COM port in the Option menu
To verify the assignation of the COM port assigned by the PC check in the control
panel, System, Hardware, peripheral, ports
.
To start the firmware update procedure, click the “Tools” button , Update Firmware,
and then Update Rx or Update Tx.
Supposing you are updating the Rx unit, the following screen will appear:
Turn off the receiver and then turn it on again.
how the upgrade window:
Both the transmitter and the receiver firmware can be updated in the same way.
Be sure that the firmware files are located in the SEMS Software folder.
the PC using RS232 cable.
oftware and set the COM port in the Option menu
To verify the assignation of the COM port assigned by the PC check in the control
ton , Update Firmware,
will appear: