Configuration
7
4 Configuration
IP Address
In order to communicate on the network the ICM-ETHi requires an IP address. If
you have a DHCP server on the network, this will happen automatically. Otherwise
it is possible to assign one manually using the Lantronix Device Installer program
(a separate free program available from the Lantronix web site).
Creating the Virtual Com Port
Connect up the ICM-ETHi as described above and apply power. When the unit is
connected correctly you should see a continuous green LED to the left of the RJ45
socket after it has obtained an IP address.
Run the CPR program. Once started, press the Search button to search the network
for ICM-ETHi devices. Any such are displayed on the bottom line as in the example
below (with an appropriate IP address for your network).
Figure 1
Searching the Network
Once the device is found, a COM port can be created to enable it to be accessed
from LPA-View. Click the Add/Remove button to display the Com Ports dialogue
Summary of Contents for ICM-ETHi
Page 9: ...Configuration 9 Figure 3 Com Port Settings Figure 4 Testing ...
Page 14: ......
