Installation
3
2 Installation
An overview is given here for when the customer will be using our LPA-View soft-
ware. This involves the following steps:
1 Connection
•
Connect ICM-ETHi to the ICM.
•
Plug the ICM-ETHi cable into the ICM.
•
Connect DC power supply, either using the DC connector provided or via the
internal terminal block.
•
Connect network cable between ICM-ETHi and customer network switch.
•
Install the Device Installer software from the Software CD or from the following
web address: http://ltxfaq.custhelp.com/app/answers/detail/a_id/644
•
Navigate to the Device Installer via Program menu - Follow menu instructions.
•
Identify and record the LAN address used by the device, e.g. 81.187.19.55
•
Access the Internet explorer (enter the LAN address in the navigation bar, Press
enter)
•
Access the ’’Serial Settings’’ tab and configure with the following changes from
the default (can ’’reset to default settings’’ first):
Protocol
RS485-2wire
Flow Control
None
Baud Rate
115200
Data Bits
8
Parity
Even
Summary of Contents for ICM-ETHi
Page 9: ...Configuration 9 Figure 3 Com Port Settings Figure 4 Testing ...
Page 14: ......
