Moyer Diebel 601HRG, Installation/Operation Manual With Service Replacement Parts

Page: 29 / 84

21
Operation
Drain Mode
The dishwasher will enter the drain mode whenever the ON-OFF/DRAIN power switch is pushed
down to the OFF/DRAIN position. The switch is located on the left side of the control panel.
IF THE ON OFF/DRAIN SWITCH IS PLACED IN THE OFF/DRAIN POSITION FOR MORE
THAN 3 SECONDS, THE DISHWASHER WILL CONTINUE TO DRAIN EVEN IF THE SWITCH
IS PUSHED BACK TO THE ON POSITION.
1.
Remove any dish rack that may be inside the machine.
2.
Push the illuminated power switch down to the OFF/DRAIN position.
The power switch light will go out.
3.
The cycle light will illuminate and the machine will drain.
4.
The cycle light will go out indicating that the drain cycle is complete.
DO NOT OPEN THE DOOR UNTIL THE LIGHT GOES OUT.
Operation
! VERY IMPORTANT !
Draining Problems Related To Improper Installation.
Problems with machine draining are often the result of improper installation.
NEVER EXTEND OR ADD LENGTH TO THE DRAIN HOSE.
START
OFF
DRAIN
ON
POWER