Moyer Diebel 601HRG, Installation/Operation Manual With Service Replacement Parts

Page: 18 / 84

10
! IMPORTANT !
Make sure that the flexible water supply and drain hoses are not kinked.
Installation
1. The 601HRG is a pumped drain and is equipped with a 6 ft.. 5/8" I.D. drain hose.
The maximum drain height connection must not exceed 3 ft.[1 m].
2.
The drain hose is located at the rear of the dishwasher, and is secured to the rear of
the machine provide an anti-siphoning loop in the drain hose.
3. A 3/4" hose barb fitting is strapped to the drain hose prior to shipment.
The service part number for the hose barb is P/N 0512321.
4.
Additional plumbing parts must be supplied by the plumbing installer.
5. The maximum drain flow is 15 US gpm/12.4 imp gpm/60 lpm.
! VERY IMPORTANT !
Do not connect the drain hose to a disposer. The dishwasher will not drain correctly.
Drain Connection
Side View Plan View
42-3/8" [1076mm]
26-3/4"
[679mm]
DH = Drain Hose
5/8" I.D., 6 ft [1829 mm] Long
DH
DH
! VERY IMPORTANT !
IMPROPER INSTALLATION OF MACHINE DRAIN HOSE.
Machine drain problems are often the result of improper installation and may not
be covered by the limited warranty.