Moyer Diebel 383HT Installation, Operation And Maintenance Manual Download Page 6

Limited Warranty

LIMITED WARRANTY

Moyer Diebel. (herein referred to as The Company), 3765 Champion Blvd., Winston-Salem, North Carolina  27105, and  

2674 N. Service Road, Jordan Station, Canada, L0R 1S0, warrants machines, and parts, as set out below. 

 

Warranty of Machines:

 The Company warrants all new machines of its manufacture bearing the name "Moyer Diebel" 

and installed within the United States and Canada to be free from defects in material and workmanship for a period of one 

(1) year after the date of installation or fifteen (15) months after the date of shipment by The Company, whichever occurs first. 

[See below for special provisions relating to glasswashers.] Warranty registration must be submitted to Moyer Diebel within 

ten (10) days after installation either online on the Moyer Diebel website (http://www.moyerdiebel.com/service/) for the USA 

or http://www.championindustries.com/warranty-registration for Canada or by fax on the form provided in the front of this 

manual. If warranty registration is not returned to The Company within such period, the warranty will expire after one year 

from the date of shipment. The Company will not assume any responsibility for extra costs for installation in any area where 

there are jurisdictional problems with local trades or unions. If a defect in workmanship or material is found to exist within 

the warranty period, The Company, at its election, will either repair or replace the defective machine or accept return of the 

machine for full credit; provided;  however, as to glasswashers, The Company's obligation with respect to labor associated 

with any repairs shall end (a) 120 days after shipment, or (b) 90 days after installation, whichever occurs first. In the event 

that Moyer Diebel elects to repair, the labor and work to be performed in connection with the warranty shall be done during 

regular working hours by The Company's authorized service technician. Defective parts become the property of The Company. 

Use of replacement parts not authorized by The Company will relieve The Company of all further liability in connection with its 

warranty. In no event will The Company's warranty obligation exceed The Company's charge for the machine. The following 

are not covered by The Company's warranty: 

 

 

a. 

Lighting of gas pilots or burners. 

 

b. 

Cleaning of gas lines. 

 

c. 

Replacement of fuses or resetting of overload breakers. 

 

d. 

Adjustment of thermostats. 

 

e. 

Adjustment of clutches. 

 

f. 

Opening or closing of utility supply valves or switching of electrical supply current. 

 

g. 

Cleaning of valves, strainers, screens, nozzles, or spray pipes. 

 

h. 

Performance of regular maintenance and cleaning as outlined in operator’s guide. 

 

i. 

Damages resulting from water conditions, accidents, alterations, improper use, abuse,  

 

 

 

 

tampering, improper installation, or failure to follow maintenance and operation  procedures. 

 

j. 

Wear on Pulper cutter blocks, pulse vanes, and auger brush. 

Examples of the defects not covered by warranty include, but are not limited to: 

 (1) Damage to the exterior or interior finish 

as a result of the above, (2) Use with utility service other than that designated on the rating plate, (3) Improper connection to 

utility service, (4) Inadequate or excessive water pressure, (5) Corrosion from chemicals dispensed in excess of recommended 

concentrations, (6) Failure of electrical components due to connection of chemical dispensing equipment installed by others, 

(7) Leaks or damage resulting from such leaks caused by the installer, including those at machine table connections or by 

connection of chemical  dispensing equipment installed by others, (8) Failure to comply with local building codes,  

(9) Damage caused by labor dispute. 

Warranty of Parts:

 The Company warrants all new machine parts produced or authorized by The Company to be 

free from defects in material and workmanship for a period of 90 days from date of invoice. If any defect in material and 

workmanship is found to exist within the warranty period The Company will replace the defective part without charge. 

DISCLAIMER OF WARRANTIES AND LIMITATIONS OF LIABILITY. THE COMPANY'S 

WARRANTY IS ONLY TO THE EXTENT REFLECTED ABOVE. THE COMPANY MAKES NO OTHER 

WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED, TO ANY WARRANTY 

OF MERCHANTABILITY, OR FITNESS OF PURPOSE. MOYER DIEBEL SHALL NOT BE LIABLE 

FOR INCIDENTAL OR CONSE-QUENTIAL DAMAGES. THE REMEDIES SET OUT ABOVE ARE THE 

EXCLUSIVE REMEDIES FOR ANY DEFECTS FOUND TO EXIST IN THE COMPANY'S DISHWASHING 

MACHINES AND THE COMPANY'S PARTS, AND ALL OTHER REMEDIES ARE EXCLUDED, 

INCLUDING ANY LIABILITY FOR INCIDENTALS OR CONSEQUENTIAL DAMAGES. 

Moyer Diebel does not authorize any other person, including persons who deal in Moyer Diebel dishwashing machines to change this 

warranty or create any other obligation in connection with Moyer Diebel Dishwashing Machines.

ii

Summary of Contents for 383HT

































Reviews: