Moyer Diebel 383HT M2, Installation, Operation, Cleaning And Maintenance Manual

Page: 17 / 57

Installation
Detergent Set-up
DET
DETERGENT
PUMP
Fig. 10
Fig.11
Pump
Motor
Pump
Head w/roller
Squeeze Tube
(Check every 6 months
Fig. 9
1. Place the detergent pick-up tube in a full container of detergent.
2. Push dishwasher power switch ON. The dishwasher will automatically fill with water.
3. When the fill is complete, open the dishwasher door and push the detergent PRIME switch
UP. The detergent pump will run.
4. Continue to hold the prime button and watch the detergent injector at the back of the
dishwasher for signs of chemical entering the machine.
5. Release the Prime button and close the dishwasher door. Priming is complete.
Prime the Detergent Pump
NOTE: Prime the detergent pump during initial set-up and whenever the chemical
container is replaced.
USE A NON-CHLORINATED COMMERCIAL GRADE DETERGENT.
WASH TANK CAPACITY: 4 US GAL / 3.3 IMP. GAL / 15 L.
DETERGENT INJECTION POINT ON WASH TANK REAR WALL.
DETERGENT DISPENSING TIME WAS SET AT THE FACTORY.
The final adjustment should be performed by the chemical supplier.
DETERGENT PUMP IS LOCATED BEHIND LOWER FRONT PANEL.
9