manualshive.com logo in svg

Moyer Diebel 383HT M2, Installation, Operation, Cleaning And Maintenance Manual

Share
Download
Moyer Diebel 383HT M2 Installation, Operation, Cleaning And Maintenance Manual Download Page 12

Installation

Drain Connection   

DRAIN

Connect the drain in accordance with the specifications below.

CAUTION: 

The dishwasher drain connection must comply with all local plumbing, 

 

health and safety codes. Damage caused by improper installation is not covered by 

 

the limited warranty 

 

THE LIMITED WARRANTY IS VOID IF:

 

•   an extension is added to the drain hose

•   the syphon loop is modified or removed

•   the supplied drain hose fitting is not used

STOP

STOP

 

DRAIN CONNECTION WITH A DEDICATED WASTE LINE IS 

 

 

 

 

STRONGLY RECOMMENDED.

 

CONNECT THE DRAIN HOSE TO A 1-1/2" WYE FITTING.

 

THE DISHWASHER IS EQUIPPED WITH A 4FT / 1.2 m CLEAR 

   

 

 

BRAIDED DRAIN HOSE AND A 3/4" MNPT x 5/8" HOSE 

 

 

BARB ADAPTER.

 

THE DRAIN HOSE MUST BE VENTED TO PREVENT SIPHONING.

4

Summary of Contents for 383HT M2


























































Reviews:

No comments

Brands by name

Popular brands

Load more brands