OnCell G2100 Series User’s Manual
GSM/CSD Connection
5-4
Answering a CSD Connection
PComm Terminal Emulator can be used to answer a CSD call manually:
1.
When the terminal displays "RING", type
ATA
and press
Enter
.
2.
Check the GSM indicator on the front panel. If the LED is on and an amber color, the CSD
connection has been established successfully. The modem will automatically switch to data
mode. At this point, you can proceed with data communication.
PComm Terminal Emulator can be used to configure the modem to answer CSD calls
automatically:
1.
In the terminal window, type
ATS0=x
and press
Enter
. For
x
, substitute the number of rings
that the modem should receive before answering the call. For example, to answer after the first
ring, type
ATS0=1
.
2.
Type
AT&W
and press
Enter
.
To disconnect the modem, type
+++.
The modem will respond with
OK,
which means that you
have already switched back to command mode. Type
ATH
and press
Enter
to disconnect.
