MC-3201 Series Hardware User Manual
16
Connecting to an Audio Input and Output
The MC-3201 Series comes with a microphone input and a line output located on the rear panel, allowing
users to connect an audio input and an audio output.
Connecting to a Digital Input and Digital
Output
The MC-3201-TGL7 Series comes with four digital inputs and four
digital outputs connectors located on the rear panel. These
connectors are using terminal blocks; refer to the figure on the
right for detailed pin definitions.
NOTE
Terminal block (J1)—R/C (XCFR2, XCFR8), socket soldered on to the PWB, DINKLE ENTERPRISE CO., LTD,
type 5EHDRM, rated 300 V, 15 A, 105°C. Mating with plug type 5ESDVM rated 300 V, 15 A, 105°C. The
plug-half connection is secured by screws; suitable for 12 to 28 AWG wire size, secured on plug by screws
with a torque value of 0.51 N-m (4.5 lb-in).
Connecting to a NMEA Port
The MC-3201-TGL7 Series also comes with four NMEA ports located
on the rear panel. These ports are using terminal blocks; refer to
the figure on the right for detailed pin definitions.
Inserting the USIM Card
The MC-3201-TGL1-S-S has four USIM slots for 5G/LTE wireless
Internet connections. Each slot supports dual USIM cards. To install
a USIM card, gently remove the outer cover on the front panel, and
then insert the USIM card into the slot.
