Moxa Technologies INTELLIO C218, User Manual

Page: 65 / 93

Serial Programming Tools
Intellio
C218
Turbo
/
PCI User's Manual
4-11
7. MHWFLOW
This function is used to enable/disable hardware flow control. The first open()
function of a port will set the hardware flow control bits on or off depending on
the [
RTS/CTS Hardware Flow Control ] configuration in mxadm . However,
users might want to control the DTR or RTS signal on their will, thus the RTS
flow control bit should be turned off (HWFLowControlOff) in order to take
over the control of DTR or RTS signal via function MTCRTS or MTCDTR.
MTCRTS and MTCDTR can be effective only after the RTS flow control bit of
MHWFLOW is turned off.
Syntax for SCO UNIX/XENIX
#define MHWFLOW x40e
#define HWFlowControlOff 0x00
#define CTSFlowControlBitOn 0x01
#define RTSFlowControlBitOn 0x02
#define HWFlowControlOn 0x03
ioctl(moxa_fd, MHWFLOW, CTSFlowControlBitOn);
ioctl(moxa_fd, MHWFLOW, RTSFlowControlBitOn);
ioctl(moxa_fd,MHWFLOW, CTSFlowControlBitOn | RTSFlowControlBitOn);
Syntax for UNIX SVR4
#include <sys/stropts.h>
#include <sys/sysmacros.h>
#define MHWFLOW 0x40e
#define HWFlowControlOff 0x00
#define CTSFlowControlBitOn 0x01
#define RTSFlowControlBitOn 0x02
#define HWFlowControlOn 0x03
struct strioctl ioc;
int
setting;
setting = CTSFlowControlbitOn;
ioc.ic_cmd = MHWFLOW;
ioc.ic_timout = 0;
ioc.ic_len = sizeof(int);
ioc.ic_dp = (char *)&setting;
ioctl(moxa_fd, I_STR, &ioc);