DA-683 Series
Introduction
Hardware Specifications
Computer
CPU:
Intel Dual Core Atom D510 1.66 GHz processor
OS (pre-installed):
Linux or Windows Embedded Standard 2009
System Chipset:
Intel Pineview-D + ICH8M
BIOS:
16 Mbit Flash BIOS, PCI Plug & Play, ACPI function support
FSB:
667 MHz
System Memory:
1 x 200-pin DDR2 SODIMM socket supporting DDR2 667; up to 2 GB, with 1 GB built in
Expansion Bus:
PCI/104 interface reserved
USB:
USB 2.0 compliant hosts, Type A connector x 4, supports system boot up
Storage
Built-in:
2 GB industrial DOM onboard to store OS
Storage Expansion:
CompactFlash socket for CF card expansion, supporting CF Type-I/II
HDD Support:
2 SATA-300 connectors for HDD expansion
Other Peripherals
KB/MS:
1 PS/2 interface, supports standard PS/2 keyboard and mouse through Y-type cable
Display
Graphics Controller:
Intel® GMA3150 graphics controller in Intel D510 card
DVI Interface:
• Analog RBG display; output resolution up to 2048 x 1536 @ 60 Hz
• Digital DVI display; output resolution up to 1024 x 768 @ 60 Hz
Ethernet Interface
LAN:
6 auto-sensing 10/100/1000 Mbps Gigabit ports
Magnetic Isolation Protection:
1.5 KV built-in
Serial Interface
Serial Standard:
2 RS-232 ports (DB9 male)
Serial Signals
RS-232:
TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND, RI
Digital Input
Input Channels:
4, source type
Input Voltage:
0 to 30 VDC
Digital Input Levels for Dry Contacts:
• Logic level 0: Close to GND
• Logic level 1: Open
Digital Input Levels for Wet Contacts:
• Logic level 0: +3 V max.
• Logic level 1: +10 V to +30 V (source to DI)
Connector Type:
10-pin screw terminal block (4 DI points, 4 DO points, DI source, GND)
Isolation:
3 KV optical isolation
Digital Output
Output Channels:
4, sink type
Output Current:
Max. 200 mA per channel
On-state Voltage:
24 VDC nominal, open collector to 30 V
Connector Type:
10-pin screw terminal block (4 DI points, 4 DO points, DI source, GND)
Isolation:
3 KV optical isolation
LEDs
System:
Power, Storage, Power Failure x 2
Gigabit LAN:
100M x 6, 1000M x 6
Serial:
TX/RX
Communication:
Module A x 16, Module B x16
Programmable:
LED x 8
1-5
