DA-682C Series
Hardware Installation
2-15
5.
There are two plastic rails inside the slot. Make sure to insert the storage tray into the rails.
6.
Push the disk tray into the computer; make sure the storage tray has been successfully inserted. Use the
same method to install another disk if necessary.
7.
Restore the storage tray door to complete.
Installing the Expansion Module
The DA-682C comes with two expansion sockets, allowing users to install various expansion modules such as
Gigabit Ethernet module and serial communication module. Follow these steps.
1.
Unfasten the two screws on each module plate, and then remove the plate.
2.
Insert the expansion module into the slot.
3.
Make sure the module has been successfully inserted. Fasten the screws to complete.
ATTENTION
Please ensure to power off the computer first and then install/remove the expansion modules.
