DA-682C Series
Hardware Installation
2-13
Installing an mSATA Storage Card
The DA-682C embedded computer comes with an mSATA socket. To insert an mSATA storage card, follow
these instructions.
1.
Disconnect the DA-682C from its power source.
2.
Unfasten the screws on the back of the computer, and then take off the upper cover.
3.
Unfasten the two screws on the metal bar in the middle of the cabinet. The mSATA socket is located below.
4.
Insert the mSATA storage card into the socket, and fasten the two screws to fix the card.
5.
When finished, restore the metal bar, the upper cover of the computer and fasten the screws.
ATTENTION
The DA-682C rackmount computer does not support the mSATA storage card hot swap and PnP (Plug and Play)
functions. It is necessary to remove power source first before inserting or removing the mSATA storage card.
