DA-682C Series
Hardware Installation
2-8
Connecting USB Devices
The DA-682C comes with 2 USB 2.0 ports on the front panel and 3 USB 3.0 ports on the rear panel. The USB
ports can be used to connect to other peripherals, such as flash drives for expanding the system’s storage
capacity. In addition, both USB ports support system boot up, which can be activated by modifying the BIOS
settings. See
Installing a USB Dongle Kit
You can use a USB Dongle Kit to secure your USB dongle inside your DA-682C computer.
NOTE
The USB Dongle Kit is an optional accessory that can be purchased separately.
To install a USB Dongle Kit inside your DA-682C computer, do the following:
1.
Power off the DA-682C computer and remove the upper cover of the computer. Find the location of the USB
socket.
