AWK-5232
Getting Started
2-4
Testing Method for two or more AWK-5232s
If you have two or more AWK-5232s, you will need a second notebook computer (B) equipped with an Ethernet
port. Use the default settings for the first AWK-5232 connected to notebook A and change the second or third
AWK-5232 connected to notebook B to Client mode. Then, configure the notebooks and AWK-5232s properly.
After setting up the testing environment, open a DOS window on notebook B. At the prompt, type
ping <IP address of notebook A>
and then press Enter. A “Reply from IP address …” response means the communication was successful. A
“Request timed out” response means the communication failed. In this case, recheck the configuration to make
sure the connections are correct.
Function Guiding Map
The management functions are categorized in a tree and shown in the left field of the web-based management
console. You can efficiently locate the function you need with the following guide.
