Moxa Technologies airworks awk-5232 User Manual Download Page 36 | Manualshive

Page: 36 / 81

background image

AWK-5232

Web Console Configuration

3-22

WLAN Certification Settings

(for EAP-TLS in Redundant Client,

Client or Slave mode only)

When EAP-TLS is used, a WLAN Certificate will be required at the client end to support WPA/WPA2-Enterprise.
The AWK-5232 can support the PKCS #12, also known as Personal Information Exchange Syntax Standard,
certificate formats that define file formats commonly used to store private keys with accompanying public key
certificates, protected with a password-based symmetric key.

Current Status displays information for the current WLAN certificate, which has been imported into the
AWK-5232. Nothing will be shown if no certificate is available.

Certificate issued to: shows the certificate user
Certificate issued by: shows the certificate issuer
Certificate expiration date: indicates when the certificate gets invalid

You can import a new WLAN certificate in Import WLAN Certificate by following these steps in order:

1.

Input the corresponding password (or key) in the Certificate private password field. Then click Submit
to set the password.

2.

You can see the password displayed in the Certificate private password field. Then click on the Browse
button in Select certificate/key file and select the certificate file.

3.

Click Upload Certificate File to import the certificate file. If it succeeds, you can see the information
uploaded in Current Certificate. If it fails, you may need to return to step 1 to set the password correctly
and then import the certificate file again.

NOTE

The WLAN certificate will remain after the AWK-5232 reboots. Even though it is expired, it can still be seen on
Current Certificate.

Advanced Settings

Several advanced functions are available to increase the functionality of your AWK-5232 and wireless network
system. The DHCP server helps you deploy wireless clients efficiently. Packet filters provide security
mechanisms, such as firewalls, in different network layers. Moreover, the AWK-5232 can support STP/RSTP
protocol to increase the reliability across the entire network. In addition, SNMP support can ease the network
management via SNMP protocols.

«
...
34
35
36
37
38
...
»

Summary of Contents for airworks awk-5232


















































































Reviews:

No comments

Related manuals for airworks awk-5232

Asynchronous SH7145F

Brand: Renesas Pages: 17

Brand: Ruckus Wireless Pages: 102

Brand: Aztech Pages: 2

BladeCenter Management Module

Brand: IBM Pages: 184

Emulator MCU Board for 38D5 Group M38D59T-RLFS

Brand: Renesas Pages: 4

Brand: Lanner Pages: 63

Brand: peplink Pages: 2

Brand: Altera Pages: 42

Brand: Maipu Pages: 80

Brand: TP-Link Pages: 176

IPLink 2603 Series

Brand: Patton Pages: 120

PowerBeam PBE-5AC-400-ISO

Brand: Ubiquiti Pages: 23

PCard-E 021L-D5 Series

Brand: ORiNG Pages: 2

NetCon FBR-1409TX

Brand: LevelOne Pages: 88

Q-SYS QIO-GP8x8

Brand: QSC Pages: 13

Brand: NUROTRON Pages: 16

NetStructure ZT 5085

Brand: Intel Pages: 106

SmartNode 4634 Series

Brand: Patton electronics Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands