16
4. Screw the nylon cutting head onto the shaft clockwise as the arrow shows (Fig.8D)
Fig.8A Fig.8B Fig.8C
Fig.8D
NOTE
: Always wear gloves when handling the cutter blade.
8. FUELS/REFUELING
Handling fuel
Utmost care is required when handling fuel. Fuel may contain substances similar to solvents. Refuel either in
a well ventilated room or outdoors. Do not inhale fuel vapors, avoid any contact of fuel or oil with your skin.
Mineral oil products degrease your skin. Prolonged skin contact with these products will cause your skin to
become extremely dry, which may result in various kinds of skin disease. In addition, allergic reactions may
occur.
Eyes can be irritated by contact with oil. If oil comes into your eyes, immediately wash them with clear water.
If your eyes are still irritated, see a doctor immediately.
Refueling
CAUTION: The engine must be switched off.
CAUTION: Add mixture of gasoline and engine oil, the ratio of gasoline and engine oil is 40 to
1
fuel & oil ratio/ quality
The engine of your brush cutter/ line trimmer has got to be operated with a mixture of fuel and oil. The quality
of those two operating materials is decisive for a proper function and a long lifetime of the engine. Inadequate
fuel, oil or mixture ratio will lead to serious damages to the engine, i. e. piston seizure, premature wear, ASO).
The correct mixture ratio is (fuel:oil) 40:1.
Washer
