12
Fig.2C Fig.2D
5.2 Mounting the loop handle for PT 25 LH (DYM246406)
1. There are there location holes in the shaft, chose any one as an easy-to-operate position. (Fig.3A)
2. Put the assistant handle into place, make sure the limit block full seated in the limit slot. (Fig.3B/Fig.3C)
3. Fix the assistant handle with bolts, washers and nuts, tighten the four bolts. (Fig.3D/Fig.3E)
4. The assembly assistant handle is shown as Fig.3F
Fig.3A Fig.3B Fig.3C
Fig.3D Fig.3E Fig.3F
5.3 ASSEMBLE THE MIDDLE TUBE FOR PT 25 LH (DYM246406)
1. Pull out the positioning pin and fix the middle tube to the head. Remember the installation hole should be
faced to positioning pin in order to fix securely. (Fig.4A/ Fig.4B/ Fig.4C)
2. Rotate the locking knob
（
turn clockwise
）
to fix the tube firmly. (Fig.4D)
Fig.4A Fig.4B
Limit block
Limit slot
Positioning pin
Installation hole
