15
4. Tighten the nut anti-clockwise as the arrow shows. (Fig.7H)
Fig.7A Fig.7B Fig.7C
Fig.7D Fig.7E Fig.7F
Fig.7G Fig.7H
The nylon cutting head
1. With the hex wrench still in place (Fig.7I).
2. Screw the nylon cutting head onto the shaft anti-clockwise as the arrow shows (Fig.7J).
Fig.7I Fig.7J
NOTE
: Always wear gloves when handling the cutter blade.
For PT 25 LH (DYM246406)
The nylon cutting head
1. Turning the equipment upside down. (Fig.8A)
2. Put the washer into place. (Fig.8B)
3. Insert the hex wrench through the hole in the gear case. (Fig.8C)
