- 35 -
4.2.3.2
Verify Turn Signal
Turn on the turn signals and see if the box with arrow is blinking in orange
color in accordance with turn signals. If the box is already blinking in
orange before you turn the signals on,
please click the “Correction” and see if it’s
working as written above.
4.2.4
Camera Location and Vehicle Measurement
Camera location and vehicle measurement can
affect MDAS-9
’s
performance. It is very
important put accurate data for the best
performance.
Camera
Height
Distance from ground to the center of camera lens.
Camera
Center
Distance from the center of windshield to camera lens
“
-
“: Left Side / “+”:Right Side
(If MDAS-9 is attached 5cm to the right from the center, input 5.
If MDAS-9 is attached 5cm to the left from the center, input -5.)
Camera to
Wheel
Distance from the camera to the center of the wheel.
For trucks or buses
, some vehicles’ wheels are located
behind.
In this case, please input 20cm.
Vehicle
Width
Distance between the wheels.
Measure distance from left outside boarder to right outside boarder
of the wheels.
Camera to
bumper
Distance from the camera lens to the end of the bumper.
For trucks or buses
, it is recommended to input 200~300 if need
sensitive FCW warning.
