Move Bikes franklin, Manual, Page: 31 / 35

EN 32
cyfly® drive is leaking oil
All seals used for the cyfly® drive have been tested for many years under real
operating conditions. All manufacturing tolerances required for the tightness of
the seals are randomly tested by us and our suppliers. During cyfly® assembly,
we use special mounting equipment to ensure adherence to the required form
and positional tolerances.
1. Check whether the leak is due to a loose oil retention plug. Should this
be the case, tighten the oil retention plug with the applicable torque [10
Nm] using the appropriate Allen key [4mm]. Then contact your specialist
MÖVE dealer and request a special oil refill to replace the oil that was lost.
2. Pinpoint the leak and contact your specialist MÖVE dealer immediately.
7. TECHNICAL SPECIFICATIONS
Tyres:
Components Tools Moment
Axle bolt VA / HA Allen key 5 mm 8 Nm
Seat post clamp Allen key 5 mm 8 Nm
Saddle Allen key 5 mm 8 Nm
Stem - head tube clamping Allen key 5 mm 8 Nm
Stem - handlebar clamping Allen key 5 mm 8 Nm
Brake lever - handlebar Allen key 4 mm 4 Nm
Brake caliper Allen key 5 mm 8 Nm
Shift lever - handlebar Allen key 3 mm 3 Nm
Handlebar grips Allen key 3 mm 3 Nm
Bicycle bell Allen key 2,5 mm 2 Nm
Fender - fork Allen key 5 mm 8 Nm
Fender stays F / R Allen key 4 mm 5 Nm
Fender - frame Allen key 4 mm 5 Nm
Fender - luggage carrier Allen key 4 mm 5 Nm
cyfly® - clamping Allen key 6 mm 24 Nm
cyfly® - pendulum bolt TX 40 30 Nm
cyfly® - central screw TX 40 40 Nm
cyfly® - pedal crank clamping TX 25 6 Nm
cyfly® - chainguard Allen key 3 mm 3 Nm
cyfly® - chainring Allen key 5 mm + Allen key 6 mm 10 Nm
cyfly® - oil retention plug Allen key 4 mm 10 Nm
Pedals Allen key 6 mm 35 Nm
Tyre type Size Tyre pressure Max. tyre pressure
Continental Top Contact II 47-622
1,5 to 4 bar
(recommended 2,5 bar)
4 bar
Gear ratio:
Chainring / MÖVE / Kappstein 46T
Cassette / Shimano CS-M8000 XT cassette 11-fach 11-46
1
1 2 3 4
2 3 4 5 6 7 8 9 10 11
Tightening torques: