Movacolor MCTC CPU Exchange Manual Download Page 6

Page: 6 / 7

MCTC CPU Exchange manual

Insert the new CPU board in the socket. Place the connection side first in the socket, the board within a
small angle related to the mainboard.

Push down the board gently until it “clicks” in the locking mechanism

. Be sure the module is inserted

correctly (straight).

WRONG CORRECT

Close the MCTC control cabinet and place/tighten the 4 screws.

Summary of Contents for MCTC CPU Exchange

Page 1: ...MCTC CPU Exchange Software version MCTC2 X and higher Manual revision 03 Language English Date March 2017 ...

Page 2: ...change manual Index Index 2 1 Introduction 3 Symbols 3 Terms 3 Transport 3 Receipt 3 2 General information 4 Safety 4 Certification 4 Operating environmental conditions 4 3 CPU Exchange 5 4 Touchscreen calibration 7 ...

Page 5: ...e mains power is unplugged MCTC CPU EXCHANGE Open the MCTC control cabinet by loosening the 4 screws on the both sides of the control cabinet Loosen the 2 upper screws remove the 2 lower screws Unlock the CPU board by moving both the locks sideward simultaneously gently The CPU board pops up a little bit you can take it out of the socket now ...

Page 6: ...ection side first in the socket the board within a small angle related to the mainboard Push down the board gently until it clicks in the locking mechanism Be sure the module is inserted correctly straight WRONG CORRECT Close the MCTC control cabinet and place tighten the 4 screws ...