Movacolor MC-TC Manual Download Page 13 | Manualshive

Page: 13 / 71

background image

13

MCTC manual

System Configuration: Login Rights configuration menu

In this menu, the Login level rights of some functionality can be changed.

System Configuration: Tooling password

Password for Tooling user level, 4 numerals, default 1111.

System Configuration: Supervisor password

Password for Supervisor user level, 4 numerals default 2222.

System Configuration: IP address

IP-address for use in a network environment (TCP/IP protocol). (For example 192.168.1.100)
When the Movacolor dosing system is part of a network, the controller must have an IP-address for
identification.



This IP-address has to correspond with the IP-address of your computer.

Ask your network administrator for a unique address.

System Configuration: Netmask

Netmask for use in a network environment (TCP/IP protocol). (For example 255.255.255.0)
When the Movacolor dosing system is part of a network, the controller must have a Netmask for accessing
the TCP/IP network.

System Configuration: Gateway

Gateway address for use in a network environment (TCP/IP protocol). (For example 192.168.1.1)
When the Movacolor dosing system is part of a network, the controller must have a Gateway for accessing
the TCP/IP network.



This Gateway-address has to correspond with the Gateway-address of your computer.

Ask your network administrator for the correct gateway

setting.

System Configuration: Nameserver

The nameserver setting sets the IP address of the to use DNS Server. This is only needed when a fixed IP
address has been set and the use of the customer support function is needed. When setting a fixed IP
address, the nameserver will by default be set to the 8.8.8.8 public free DNS server from Google.

System Configuration: MCSmart IP Address

IP Address of the computer where MCSmart agent software is active. MCSmart is a monitoring, logging,
reporting PC software application. See MCSmart manual for more details.

System Configuration: Screen Time out

This button can be used to enable or disable the screen time out. If set to ON, the screen time out time can
be set, as well as the screen backlight level. If enabled, the user level will reset to operator and the unit will
navigate to the production screen, after the time out time has elapsed.

«
...
11
12
13
14
15
...
»

Summary of Contents for MC-TC








































































Reviews:

No comments

Related manuals for MC-TC

Brand: Ransburg Pages: 49

Brand: Balboa Pages: 2

Brand: Badger Meter Pages: 20

Brand: Wavetec Pages: 17

Brand: Calsense Pages: 9

Smart Controller

Brand: MaestroHome Pages: 10

Harmony Controller 2000

Brand: A10 Pages: 27

Brand: Samson Pages: 2

Brand: Radware Pages: 98

Brand: RabbitCore Pages: 34

Brand: Taoglas Pages: 2

Brand: WAM Pages: 62

Brand: walimex Pages: 7

Brand: Walchem Pages: 2

Brand: Walchem Pages: 73

Brand: Walchem Pages: 126

Brand: wallas Pages: 2

CentriPro Aquavar SOLO

Brand: Xylem Pages: 48

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands