S e t u p S e l e c t i o n s
Allows an operator to set the direction for capturing the torque readings:
(Clockwise, Counter Clockwise and Both directions).
Use the
Up / Down scroll keys
to change between BOTH, CW and CCW.
When finished, press
Enter
to end the process and store the setting.
Direction
This function sets the contrast of the Display.
Use the
Up scroll key
to increase the contrast and the
Down scroll key
to
decrease the contrast. When finished, press
Enter
to end the process and store
the setting.
Contrast
Page 10
DIRECTION SETTING
Direction: BOTH
SET LCD CONTRAST
Contrast: 60
The function allows the user to change the language of the meter. Only two lan-
guages are available in the meter at one time
Use the
Up / Down scroll keys
to change between languages. When finished,
press
Enter
to end the process and store the setting.
Language
LANGUAGE SETTING
Language: English
The meter will automatically turn off after 10 minutes of non use (no torque read-
ings or no presses of the key pad buttons).
This function is used to turn off the sleep mode for users that do not want the
meter to go to sleep.
Use the
Up / Down scroll keys
to change between sleep mode On / Off. When
finished, press
Enter
to end the process and store the setting.
Caution:
The meter will have significantly less operational life if Sleep Mode is
turned off.
Sleep
SLEEP MODE SETTING
Auto Sleep: On
TOLERANCE SETTING
Low: 10.000
High: 14.00
Units: Lbf.in
The Tolerance parameters control the Go and No-Go multicolored Green / Red
LED and In Tolerance and Out of Tolerance indication on the meter screen. The
user sets a lower and upper torque threshold to get a visual warning signal when
these limits are reached or breached during operation.
When you first enter the Tolerance Setting screen Low Tolerance will be in
reverse video. When this is true you can scroll between Low and High tolerance
using the
Scroll Up / Down keys
.
To set the Tolerance press
Enter
and the value will change to normal video and
the cursor with be on the last digit. Use the
Scroll Up / Down keys
to increase
or decrease digits and
scroll left
to move to the next digit. When done with Low
Tolerance press
Enter
and the Low Tolerance will appear in reverse video. Use
Scroll down
to move to High Tolerance and then press
enter
to edit the value.
After completion press the
Menu key
.
Tolerance
Corporate Headquarters:
1080 North 11th Street, San Jose, CA 95112 Phone: (408) 292-2214 Fax: (408) 292-2733
www.mountztorque.com
