4
!
Lay the 1/16” bottom fuselage sheet on the worktable and glue bulkheads F2/F3, F5, F6, F8, F9,
and F10 in place perpendicular to the base. Don’t glue F1 in place yet. Make sure the bulkheads
are seated firmly against the bottom sheet.
!
Position the two bottom side fuselage stringers and glue with thin CA. Only glue from F2/3 back
!
Position
one
top side fuselage stringer and glue in place. After gluing one side of the stringers to
the fuselage bulkheads, glue the canopy braces F4 and F7 into place. After F4 and F7 are
installed, position and glue the other top side stringer.
!
Glue F1 into place.
!
Glue the 1/16” plywood motor mounts into place with thick CA.
!
Gently bend the front of the bottom sheet up to the stringers and F1 and glue with thin CA.
!
Glue the motor mount parts together ensuring they are square and tight. Position the motor mount
stick in the two motor mounts so that it just extends past the rear mount. Glue with thick CA.
