![background image](http://html1.mh-extra.com/html/moulinex/studio-minid2sl/studio-minid2sl_instruction-manual_1839919037.webp)
The washing cycle will not start if the dishwasher door is left open or not properly
closed.
Do not open the door when the dishwasher is working since hot water may be
ejected, which could cause scalding.
Adding extra crockery
1.
Press
.
2.
Open the door a little to stop the dishwasher, taking care to avoid the escaping steam.
3.
After the spray arm stops working, you can open the door completely.
4.
Place the crockery inside the dishwasher.
5.
Close the door.
6.
Press
and the dishwasher will run.
Modifying a washing program in progress
You can modify the washing program if the dishwasher just worked for a short time.
Otherwise, the detergent may have already been released and the appliance may have
already drained the wash water. In this case the cycle must be restarted.
1.
Press
to pause when the door is closed.
2.
Press and hold
for about 3 seconds to enter the standby state. The display will show
“-:--
“
3.
Change the program to select a new programme.
The new program indicator light will illuminate.
4.
Press
to start the new program.
.
CLEANING AND MAINTENANCE
Always switch off and unplug the appliance before
cleaning.
Do not use chemical solvents or strong detergents
as these may damage the cosmetic finish.
Clean the outer surfaces and the tank of the
dishwasher with a damp cloth.
EN-13