![background image](http://html1.mh-extra.com/html/moulinex/studio-minid2sl/studio-minid2sl_instruction-manual_1839919030.webp)
Water Pressure
For best operating results, incoming water pressure should be between 0.04 MPa and
1MPa. Incoming water supply for the dishwasher is controlled by a ‘pressure switch’, so if
the household water pressure is low, dishwasher fill time will increase or may not operate.
WARNING
:
Please close the hydrant after using.
Connection of drain hoses
If leaks are detected, immediately shut the water supply and check the hose connections
fully. Re-tighten the connections if necessary.
If for any reason you are unable to stop the leak yourself please seek advice from a
qualified plumber.
OPERATION
Before loading the dishes into the baskets, it is necessary to:
Remove coarse food remains, e.g. bones, which may clog the filter or damage the wash
pump.
Soak any pots or pans with burnt-on food remains on the bottom then load them into
the
basket.
Warnings:
Make sure that the dishes are securely in place so that they cannot tip over or obstruct
the rotation of the spray arm during the washing cycle.
Load hollow items such as cups, glasses, etc. with the opening facing downwards so that
the water cannot collect in the container or a deep base.
Cured items or those with recesses should be loaded aslant so that water can run off.
All utensils are stacked securely and cannot tip over.
Dishes and items of cutlery must not lie inside one another, or cover each other.
Do not place glasses too close together because they may knock against each other and
break.
Long bladed knives stored in an upright position are a potential hazard!
Attach the drain hose to the dishwasher inlet.
Place the clamp over the hose and tighten with
a screwdriver
(not supplied).
EN-6