![background image](http://html1.mh-extra.com/html/moulinex/studio-minid2sl/studio-minid2sl_instruction-manual_1839919035.webp)
*
EN 50242:
This program is the test cycle. The information for comparability test in
accordance with EN 50242 are as follows:
The power consumption in left-on mode is 0.49W (door open), in off-mode it is 0.45W.
Starting the Dishwasher
1.
Turn the water tap on.
2.
Open the dishwasher door.
3.
Check the filters.
Ensure they are clean and properly positioned. See “Cleaning and maintenance”
section.
4.
Check that there is salt.
5.
Load the dishes.
Ensure that the spray arm can rotate freely.
6.
Add the required amount of detergent into the dispenser according to the “Washing
Programs” table.
7.
Close the dishwasher door securely. Press and hold
for about 2 seconds
to switch on
the dishwasher.
8.
Select the desired washing program using the buttons
,
,
and .
Repeatedly press
to select the ECO, 1 Hour or Rapid program. The display will
show P1, P2 or P3.
P1 –
P2 –
P3 –
Press
to select hot or cold fruit wash program. The corresponding
indicator light will illuminate.
Hot Fruit Wash: The display will show the washing time 12 minutes (0:12).
Cold Fruit Wash: The display will show the washing time 6 minutes (0:06).
Fruit
wash
(Cold)
Suitable for fruits
with a weak surface,
such as strawberries
Rinse
/
6
0.01
5
Baby care
(adding
steam)
Suitable for washing
baby bottles
Wash (69°C)
Rinse
Rinse (70°C)
Drying
/
120
0.5
5
Glass
(adding
steam)
For lightly soiled
loads, such as glasses,
crystal and fine china
Wash (50°C)
Rinse
Rinse (65°C)
Drying
/
90
0.4
5
EN-11